Production tooling and spare parts for spinning equipment
The card filleting is designed for topping opening parts of carding machines, used in spinning industry. It consists of a flexible base where steel wire spikes with edged tips, normally base bending, are slantwise fixed.
Width — 22-24 mm.
Triple-layer twill base with rubber cushion.
ДCramp needle diameter - 0.28 mm.
To purchase a card filleting, please send us a message or call us.
BRIEF DESCRIPTION
Apron grades:
"B"- high-precision aprons without tensioning device or with overall tensioning device.
"Н"- conventional aprons with separate tensioning device.
Apron design:
triple-layer with thread reinforcement (endless and disconnectable).
Apron sizes:
B grade
internal size from 29 mm up to 77 mm,
width from 28 mm up to 50 mm,
wall thickness from 0,9 mm up to 1,5 mm.
H grade
internal size from 55 mm up to 107 mm,
width from 28 mm up to 42 mm,
wall thickness from 0,9 mm up to 1,5 mm.
To purchase rubber aprons, please send us a message or call us.
are designed for straightening and parallelization of flax and hemp-jute fibers while processing as well as fiber delignating.
Two types of combs are available: single-row combs and double-row combs. Double-row comb needles are staggered.
|
Type |
Density, needles/cm |
Length L, mm |
Height С, mm |
Width В, mm |
Needle size, mm |
|
|
diameter d |
length Н |
|||||
|
I |
2,0; 3,5; 4,0; 5,0 |
72; 76; 102; 108 |
5,0; 6,0 |
8,0; 9,0 |
1,3; 1,5; 1,7 |
22,0; 25,0; 28,0 |
|
II |
1,2...10,0 |
38...180 |
4,0; 5,0; 6,0; 8,0; 9,0 |
5,0; 7,0; 8,0; 9,0; 12,0; 14,0 |
0,65; 0,7; 0,9; 1,1; 1,3; 1,5; 1,7; 2,2 |
16,0...50,0 |
To purchase combs for spinning-preparatory machines, please send us a message or call us.
Are designed for wool spinners and flax spinning frames TU 17-40-900, TU RSFSR 32-45.
Coupling sizes:
- for wool spinner P-76-ShТ2 116х112х1,1(1.2)mm;
- for drawing box V- 80 116х62х1,1 (1,2)mma;
- combing ones 590х530х3,5mm \ 580х540х3,5mma;
- roving ones (without carcass) 460х145х1,6mm \ 500х145х1,6mma;
- drawing ones for machines such as LMSh-220, LL-1, 2, 3-4, 2LCh-1-LO, Schlumberger type 29. 600х200х3,5mm \ 600х220х3,5mma;
- Sant’ Andrea Novara, model DRM 490х270х1,6mma;
- ribbon lapping ones 740х290х3,5mma;
- for Tematex machines 1000х210х3,5mm \ 1160х270х3,5 mm;
- Sant’ Andrea Novara, model SE/B; SZ/n;
- spinning ones for machines PM-88-L5 - 330х116х1,2mm, PS-100-LO - 490х175х1,6mm, PM-132-PD - 625х65х1,6mm, PS-100-L - 625х220х1,6mm, PS-132-PD - 496х200х2,5.
Coupling design:
Outer layer – rubber, number V-601. Inner layer – rubber, number I-713. Cotton thread, cotton-lavsan thread and caprone thread 3K are applied as a reinforcing material.
To purchase rubber couplings, please send us a message or call us.
|
Plate type |
Density, needles/dm |
Needle sizes, mm |
Plate length L, mm |
|
|
round |
plate |
|||
|
1 |
2,6 |
3,0 х 28 |
- |
|
|
2...8 |
2; 3; 4; 6; 8; 12;16 |
3,0x28; 2,5 х 28; 2,2 х 28 |
- |
|
|
9...14 |
20; 24; 28; 32; 36; 40 |
1,7 х 25; 1,5 х 25 |
- |
280; 302; 303; 305 |
|
14...20 |
40; 48; 56; 64; 72; 80; 88 |
- |
1,58 х 0,93 х 26; 1,45 х 0,72 х 26; 1,1 х 0,64 х 26 |
|
|
21А...25А |
88; 96; 104; 112; 120 |
- |
||
Offset from the initial strip of needles in the plates of type from 1 up to 8 — 3; 4; 2,8; 4; 2,8; 4; 2,84 4. The plate of type 1 is allowed to be equipped with cramps instead of needles. The plates of types21 А...25А are manufactured in double strip version.
While placing an order please specify: density of needle (wire) set and plate length.
To purchase a filleting plate card, please send us a message or call us.
